Your location:Home   News   Company News
How to use marble glue resin
 Aug 01, 2022|View:418

Marble glue resin is a kind of transparent liquid, which has the characteristics of low viscosity, good leveling, good defoaming performance, good transparency after curing, and high hardness. Then how to use marble glue resin? Let's give you a specific introduction.

First of all, the base surface should be cleaned to ensure that it is solid and flat. The smooth concrete surface should be polished and rough before construction. The protruding and sharp parts should be removed and cleaned, and there is an uneven base surface. It is necessary to repair and level with interface treatment agent to improve the bonding force between the leveling layer and the wall.

Marble glue resin

The following are the construction steps of marble glue resin:

1、Mixing: mix the marble adhesive with clean water in the proportion of 25 kg: 7 L, and stir it evenly to form a paste. Then stand for 3-5 minutes and stir again.

2、Use a scraper to apply the marble paste on the base surface: the thickness is not less than 10mm.

3、Scrape the tooth strip with a tooth scraper: scrape about 1 square meter each time, using 10 mm × 10mm toothed scraper, the included angle between the toothed scraper and the base surface is about 70 degrees.

4、Scrape the back of the marble and rub it on the base surface: the thickness shall not be less than 3mm.

5、Adjust the spacing between marble joints: adjust with a proper cross.

Rule composite material is a marble glue resin supplier. We have many years of experience in producing marble glue resin. At present, the marble glue resin we produce is not only of good quality, but also of relatively low price. If you need it, you are welcome to consult!